• Short Lead Time for Wras Approved Rubber Manufacturer - A-2 ~Double Arch Rubber Expansion Joint – Lide

    Short Lead Time for Wras Approved Rubber Manufacturer - A-2 ~Double Arch Rubber Expansion Joint – Lide

    Our available goods Double-arch products are used where more movement is needed. If the piping pressure is much higher, reinforced bolts should be assembled together with flanges. Reinforcement layer of the bellows by Nylon cords and at both ends by hardened steel wire rings. The floating steel flanges are drilled according to DIN, ANSI, BS, JIS and other standards. Specifications I II III Working Pressure Mpa (Kgf/Cm2) 1Mpa (10) 1.6 (16) 2.5 (25) Test Pressure 1.5Mp...
  • Factory wholesale Flexible Rubber Joint - A-4 ~Spool Type Rubber Expansion Joint – Lide

    Factory wholesale Flexible Rubber Joint - A-4 ~Spool Type Rubber Expansion Joint – Lide

    Our available goods The spool type rubber joint is molded type, with a metal collar reinforced at the neck of the body. The ST stype uses a light reaining ring to support the integral flange. STF is filled arch, with 50% of the ST allowed movements, but it has 4 times spring rates than hollow arch. Specifications I II III Working Pressure Mpa (Kgf/Cm2) 1Mpa (10) 1.6 (16) 2.5 (25) Test Pressure 1.5Mpa 2.4Mpa 3.75Mpa Burst Pressure Mpa (Kgf/Cm2) 3 (30) 4.8 ...
  • Fast delivery Rubber Expansion Joint Distributor - A-1 ~Single Arch Rubber Expansion Joint – Lide

    Fast delivery Rubber Expansion Joint Distributor - A-1 ~Single Arch Rubber Expansion Joint – Lide

    Our available goods The single-arch product can reduce the vibration and noise, which can also solve the axial/lateral/angular movements/eccentric problems. Reinforcement layer of the bellows by Nylon cords and at both ends by hardened steel wire rings. The floating steel flanges are drilled according to DIN, ANSI, BS, JIS and other standards. If the piping pressure is much higher, reinforced bolts should be assembled together with flanges. Specifications I II III Working Pressu...
  • 2018 Latest Design Fabric Rubber Expansion Joint - A-3 ~Wide Arch Rubber Expansion Joint – Lide

    2018 Latest Design Fabric Rubber Expansion Joint - A-3 ~Wide Arch Rubber Expansion Joint – Lide

    Our available goods Wide arch system is the molded expansion joint, with integral flange and without a metal reinforcement at the neck of the body. Wide arch allows greater movements and low spring rates comparing to spool type. WA and WAF is used for an economical wide arch rubber expansion joint.  WAF is filled arch, with 50% of the WA allowed movements, but it has 4 times spring rates than wide arch. Specifications I II III Working Pressure Mpa (Kgf/Cm2) 1Mpa (10) 1.6 (16...
  • China Manufacturer for Flexible Rubber Expansion Joints - A-7 ~Rubber Pipe Connector – Lide

    China Manufacturer for Flexible Rubber Expansion Joints - A-7 ~Rubber Pipe Connector – Lide

    Our available goods Rubber Pipe is an economical, abrasion-resistant replacement for steel and cast iron pipe, either in straight lengths or where a specified radius is required. B-1 Rubber Pipe may be used in conveying ore, corrosive chemicals, sand,and other abrasive slurries. It is absolutely necessary that rigid metal pipe on both ends of the pipe be properly anchored to eliminate the danger of excessive elongation. If the pipeline is not anchored, control units should be used. Material: ...
  • 2018 Good Quality 4 Expansion Joint - A-9 ~Other Products – Lide

    2018 Good Quality 4 Expansion Joint - A-9 ~Other Products – Lide

    Our available goods Clamp Rubber Expansion Joint Clamp-Pipe-Connector Flange Gasket-1 Triple Arch Expansion Joint Rubber Joint Tee SA-Reducer Flange Gasket-3 Flange Gasket-2 Our production process quality control We treasure process quality control, there is very strict operation specification each process, which can ensure the goods quality: 1.    We use electronic weigher to weigh the weight of ingredients, the precision of weight is gram. So there is no surplus compounds elements; ...
  • Factory selling Rubber Expansion Joint Catalogue - A-5 ~Threaded Union – Lide

    Factory selling Rubber Expansion Joint Catalogue - A-5 ~Threaded Union – Lide

    Our available goods Threaded unions is used When an economical threaded pipe connection is needed, the surface of the union is available both hot-dip galvanizing and electroplating. Both ends provided with a malleable iron union with female thread BS or ANSI. Specifications I II III Working Pressure Mpa (Kgf/Cm2) 1Mpa (10) 1.6 (16) 2.5 (25) Test Pressure 1.5Mpa 2.4Mpa 3.75Mpa Burst Pressure Mpa (Kgf/Cm2) 3 (30) 4.8 (48) 5.5 (55) Vacuum Kpa (Kgf/Cm2)...
  • Professional China Nbr Flexible Rubber Joints - A-4 ~Spool Type Rubber Expansion Joint – Lide

    Professional China Nbr Flexible Rubber Joints - A-4 ~Spool Type Rubber Expansion Joint – Lide

    Our available goods The spool type rubber joint is molded type, with a metal collar reinforced at the neck of the body. The ST stype uses a light reaining ring to support the integral flange. STF is filled arch, with 50% of the ST allowed movements, but it has 4 times spring rates than hollow arch. Specifications I II III Working Pressure Mpa (Kgf/Cm2) 1Mpa (10) 1.6 (16) 2.5 (25) Test Pressure 1.5Mpa 2.4Mpa 3.75Mpa Burst Pressure Mpa (Kgf/Cm2) 3 (30) 4.8 ...
  • Original Factory Viton Rubber Expansion Joint - A-2 ~Double Arch Rubber Expansion Joint – Lide

    Original Factory Viton Rubber Expansion Joint - A-2 ~Double Arch Rubber Expansion Joint – Lide

    Our available goods Double-arch products are used where more movement is needed. If the piping pressure is much higher, reinforced bolts should be assembled together with flanges. Reinforcement layer of the bellows by Nylon cords and at both ends by hardened steel wire rings. The floating steel flanges are drilled according to DIN, ANSI, BS, JIS and other standards. Specifications I II III Working Pressure Mpa (Kgf/Cm2) 1Mpa (10) 1.6 (16) 2.5 (25) Test Pressure 1.5Mp...
  • PriceList for Amco Flexible Joint - A-8 ~Standard Flanges – Lide

    PriceList for Amco Flexible Joint - A-8 ~Standard Flanges – Lide

    Our available goods The elastomers are assembled with the mating flanges, with different standards and different pressures. Sometimes, buyers need us to buy for them, shipped together with rubber joints. Below is the flange standards which we can supply: 1) ANSI B16.5, ASME B16.47 FLANGE Design: welding neck, slip on, blind, socket welding, threaded, lap-joint Pressure: 150#, 300#, 600#,900#,1500#, Wall thickness for welding neck flange: STD, SCH40, SCH80, SCH160. SCHXXS Material: ...
  • Hot-selling Pvc Pipe Rubber Flexible Joint - A-9 ~Other Products – Lide

    Hot-selling Pvc Pipe Rubber Flexible Joint - A-9 ~Other Products – Lide

    Our available goods Clamp Rubber Expansion Joint Clamp-Pipe-Connector Flange Gasket-1 Triple Arch Expansion Joint Rubber Joint Tee SA-Reducer Flange Gasket-3 Flange Gasket-2 Our production process quality control We treasure process quality control, there is very strict operation specification each process, which can ensure the goods quality: 1.    We use electronic weigher to weigh the weight of ingredients, the precision of weight is gram. So there is no surplus compounds elements; ...
  • Low MOQ for Valve Rubber Seat - A-5 ~Threaded Union – Lide

    Low MOQ for Valve Rubber Seat - A-5 ~Threaded Union – Lide

    Our available goods Threaded unions is used When an economical threaded pipe connection is needed, the surface of the union is available both hot-dip galvanizing and electroplating. Both ends provided with a malleable iron union with female thread BS or ANSI. Specifications I II III Working Pressure Mpa (Kgf/Cm2) 1Mpa (10) 1.6 (16) 2.5 (25) Test Pressure 1.5Mpa 2.4Mpa 3.75Mpa Burst Pressure Mpa (Kgf/Cm2) 3 (30) 4.8 (48) 5.5 (55) Vacuum Kpa (Kgf/Cm2)...
123456 Next > >> Page 1 / 261